Washington does not sell solar the way the sunny states do. In Arizona or Nevada the pitch is simple: cheap sun, big output, fast payback. In Washington the pitch is a negotiation with the calendar. Panels here cost a little less than the national average — $2.86 a watt against $2.89 — yet they make far less power for the money, about 1,096 kilowatt-hours per kilowatt each year against roughly 1,500 in the desert Southwest. There is no state rebate to close the gap, no state tax credit to claim, and the federal credit that used to do the heavy lifting ended on December 31, 2025. The price on the quote is, to within a sales-tax exemption, the price you pay.
What Washington offers instead is a billing rule and a tax rule, and both are unusually generous while they last. The billing rule is net metering at full retail value: every kilowatt-hour your panels send to the grid comes back as a kilowatt-hour of credit, one for one, worth the full price of power rather than a wholesale fraction of it. The tax rule is a 100% exemption from state and local sales tax on the whole system, equipment and qualifying labour, through the end of 2029. Between them they explain why a Washington system pays back in 13.9 years at Puget Sound Energy instead of never. But both rules carry expiry dates, and one of them has already run out in the only sense that matters: Puget Sound Energy, which serves about a third of the state’s homes, has already passed the capacity trigger that ends its legal duty to offer full retail credits, and keeps offering them by choice. The other rule ends on March 31 every year, when whatever credits a household has not used are handed to the utility for nothing.
That is why this guide reads the rules first and the price second. The per-watt anchor is settled and public: $2.86 a watt, a typical system of 8.64 kW, quotes between $17,160 and $34,320. The value of what the hardware makes is settled too, but only if you know which of seven large utilities delivers your power, how much sun your side of the Cascades actually gets, and whether your winter heating load is big enough to burn through a summer surplus before March 31. Two neighbours on the same street in Bellevue, with the same roof and the same quote, can end up years apart on payback because one of them heats with electricity and the other heats with gas — and the one with the gas furnace watches a third of the year’s production vanish at the March reset.
On price the state sits below the national average, and on sun it sits far below it. Hardware costs $2.86 a watt against $2.89 nationally, and a kilowatt of panels makes about 1,096 kilowatt-hours a year here — a figure that puts Washington among the weakest solar resources in the country, roughly 40% below Nevada. Power runs cheaper than the national average as well: the 12-month average to August 2026 is about 14.2 cents a kilowatt-hour all-in, against 18.0 cents nationally, and the average home uses about 928 kilowatt-hours a month for about $132. Cheap power is the quiet headwind nobody puts on the quote: every kilowatt-hour the panels make is worth less here than it would be in a dear-power state. What makes Washington distinctive is the machinery around those numbers: a net-metering law with two clocks running at once, a sales-tax exemption that is the only state money in the project, a production incentive that closed to new applicants in 2021, and a Cascade mountain range that splits the state into two different solar climates. The national guide above sets the countrywide baseline. The Washington numbers follow below, utility by utility.
Table of Contents
How Much Do Solar Panels Cost in Washington in 2026?
Two datasets describe Washington in 2026. They look like they disagree until you see what each one counts. This guide anchors on EcoGen’s Solar Cost Index, September 2026 edition: a Washington install at $2.86 per watt, or about $24,710 for the typical 8.64 kW system before incentives. That runs a touch below the $2.89 national average and below every neighbouring state except Oregon and Montana — Oregon is $2.77, Montana $2.73, Idaho $2.96. Quotes in 2026 spanned $17,160 to $34,320 by system size, with the Index price sitting near the middle of the range. At that anchor, 6 kW costs $17,160, 8 kW costs $22,880, 10 kW costs $28,600, and 12 kW costs $34,320.
The marketplace tells a different-looking story. EnergySage’s November 2026 Washington page reads $2.47 a watt — thirty-nine cents under the EcoGen anchor — on a far larger system: its average Washington quote is 13.25 kW at about $32,669, ranging from $27,769 to $37,569. The two sources are not arguing about price, so read the size gap and ignore the thirty-nine cents. EnergySage averages quotes flowing through its marketplace, and Washington homeowners seeking quotes usually want large systems — electric heat, a heat pump, an EV, a house they expect to grow into. Berkeley Lab’s count of what installers actually put on roofs gives Washington an 8.64 kW median across 3,743 systems installed in 2025. That median is the truer typical size, so this guide builds on it. EnergySage still earns its place as the cross-check: two independent readings, $2.47 and $2.86, both below the national average.
A third reading comes from SolarEnergyPrices, working from its own cost model: $3.05 a watt, range $2.80-$3.30, with a 10 kW system at $30,500. Put the three together and Washington lands a little below the national average on price, with the quote spread of $17,160 to $34,320 mattering more than any single number. The spread is the honest part: a Seattle roof with old shingles and a long permit queue is not the same job as a new Spokane roof with a clear southern face.
One thing to hold in mind about the typical size before the tables start: the 8.64 kW median is a real installed median, not a model, and it is larger than the 7.95 kW national typical — Washington homeowners buy bigger systems because each kilowatt makes less. At about 1,096 kilowatt-hours per kilowatt, 8.64 kW produces about 9,469 kilowatt-hours a year, while the average Washington home uses about 928 kilowatt-hours a month, or roughly 11,130 a year. The typical array covers about 85% of the average home’s use — a good fit, and a very different picture from states where the typical system overshoots the house by 40%. But the house does not use power evenly through the year and the panels do not make it evenly either, and on March 31 whatever credit is left over is handed to the utility for free.
Quoted per watt, the price covers the entire job — panels plus inverter or microinverters, racking and wiring, crew labour, permits, inspection, and the interconnection application. On top of the base price come a new roof, a panel upgrade, tree work, a battery, and rapid-shutdown gear. Nothing has been taken off the arithmetic yet, because there is almost nothing to take off: the sales-tax exemption means no tax is added to the quote, and there is no rebate or credit waiting below it. A quote that shows a net price far below the sticker is either subtracting the dead federal credit or inventing a state rebate — both are pricing a law that does not exist.
| Source | $ per watt | System | Cash total | Payback |
|---|---|---|---|---|
| EcoGen Index (Sep 2026) | $2.86 | 8.64 kW | ~$24,710 | 13.9-30.5 yrs by utility |
| EnergySage (Nov 2026) | $2.47 | 13.25 kW avg | ~$32,669 | 15.3 yrs — flagged, modeled |
| SolarEnergyPrices (Aug 2026) | $3.05 | 10 kW | ~$30,500 | Not published |
| NumeralQ (Oct 2026) | $2.79-$3.65 | 8 kW | $22,330-$29,170 | Not published |
| National range (article 4) | $2.25-$3.30 | 8.2 kW | ~$24,600 at $3.00/W | 6-12 yrs |
Before you trust that table, two of its rows need a warning label. EnergySage’s payback figure — 15.3 years statewide — is a modelled estimate built on its own marketplace averages, and it sits between EcoGen’s fastest utility (13.9 years at PSE) and its slowest (30.5 years at Tacoma Power) without naming either. A single statewide payback for Washington is a guess dressed as a figure, because the answer changes by a factor of two depending on which utility sends the bill. The payback section below builds the Washington answer utility by utility instead.
Solar Panel Cost in Washington by System Size
Sizing comes first, and in Washington the sizing question runs on the calendar rather than the roof. The problem is not that the surplus is worthless — under full retail net metering it is worth exactly as much as a kilowatt-hour used at home. The problem is that the surplus has an expiry date. The average Washington home uses about 928 kilowatt-hours a month — about 11,130 a year — and pays close to $132 a month for it, per EIA billing data to August 2026. Those two figures give the typical array about 9,469 kilowatt-hours a year — roughly 85% of what the average home needs. That is a comfortable fit on an annual basis. The trouble is the shape of the year: the panels make most of their power between May and September, the house uses most of its power between November and February, and on March 31 whatever is left in the credit bank goes to the utility unpaid.
Building past the house’s own annual use is a poor deal in Washington for a reason no other state in this series shares so sharply. It is not that the surplus earns a low rate — it earns the full retail rate, while it lasts. It is that the surplus expires. A kilowatt-hour banked in July and still unspent on March 31 is worth nothing at all. That is why the table below turns unattractive beyond 10 kW for most Washington homes — unless the home actually uses the power in winter. The 8.64 kW median describes exactly that case: Washington homes that install solar tend to heat with electricity or run a heat pump, and their winter load is what protects the summer surplus from the March reset. Every row is priced off the EcoGen anchor, at $2.86 a watt, with output running about 1,096 kilowatt-hours per installed kilowatt each year. The last column gives each size as a share of an average home’s use, so the crossover is easy to spot — the point where the array stops feeding the house and starts banking power it may never spend.
| Size | Cash cost at $2.86/W | Annual output | Share of a typical Washington home’s use (11,130 kWh/yr) |
|---|---|---|---|
| 4 kW | $11,440 | ~4,384 kWh | ~39% |
| 5 kW | $14,300 | ~5,480 kWh | ~49% |
| 6 kW | $17,160 | ~6,576 kWh | ~59% |
| 7 kW | $20,020 | ~7,672 kWh | ~69% |
| 8 kW | $22,880 | ~8,768 kWh | ~79% |
| 8.64 kW (state typical) | ~$24,710 | ~9,469 kWh | ~85% |
| 10 kW | $28,600 | ~10,960 kWh | ~98% |
| 12 kW | $34,320 | ~13,152 kWh | ~118% |
Two rows deserve a closer look. First, even a 10 kW system only just covers the average home’s annual use, so a 10 kW array is the right size for the average Washington home — and the 8.64 kW typical system belongs to a home that uses a little less than average, or that plans to add a load later. Second, Washington has no 120% sizing cap in its net-metering law: the statute covers systems up to 100 kW, so nothing in the law stops an average-use home from installing a 12 kW system. What stops it is the March 31 reset — every kilowatt past the house’s own winter use banks credit that may never be spent, and the extra hardware earns nothing for it. A 12 kW array on a 928-kilowatt-hour-a-month home makes about 13,152 kilowatt-hours a year, about 2,000 more than the house uses, and a good share of that surplus is likely to be handed to the utility on March 31.
Size from twelve months of bills, not from how much roof you have. Total twelve months of kilowatt-hours, then divide by roughly 1,096 — that is the size that covers them. Then look at January and February on their own: if the house heats with gas, the winter load is small and the summer surplus has nowhere to go, so stop at or below annual use. For a planned EV or a heat pump, add 1-2 kW — more with electric resistance heat, less with a shaded or north-facing roof. Then check the result against your utility’s net-metering position before you sign: a system that banks credit at PSE, where the full-retail rule survives by choice, is a different investment from one at Pacific Power, where a successor tariff is already proposed. An EV or a heat pump on the way means the solar should be sized for the bigger house now — add the load first and the panels second, or the new load arrives after the array is already sized for the smaller house. Our 6 kW vs 8 kW vs 10 kW guide walks through the full sizing process — reading twelve months of bills, knowing where to stop, and what to add for an EV or a heat pump.

Solar Panel Cost by City: Seattle, Spokane, Tacoma & Bellevue
Panel prices barely move from one city to the next. System size does not move much either — and that is the first thing to understand about Washington pricing. In the city table, the utility column comes first and the price column second. Judge incoming quotes on price per watt, never on the headline total. A Spokane quote at the low end of its range and a Seattle quote at the statewide anchor are not a close call once the utilities are in: the Spokane array makes about 20% more power per kilowatt, and the Seattle array sits on the dearest power in the state. The hardware costs the same. The sun and the bill do not.
| City | $ per watt | Avg. system | Cash total | Utility | Output per kW |
|---|---|---|---|---|---|
| Seattle | $2.86 | 8.64 kW | ~$24,710 | Seattle City Light | ~1,090 kWh/yr |
| Spokane | $2.86 | 8.64 kW | ~$24,710 | Avista | ~1,300 kWh/yr (est.) |
| Tacoma | $2.86 | 8.64 kW | ~$24,710 | Tacoma Power | ~1,090 kWh/yr |
| Bellevue | $2.86 | 8.64 kW | ~$24,710 | Puget Sound Energy | ~1,090 kWh/yr |
Seattle is the biggest market in the state, served by Seattle City Light, and the city where the sun is weakest. At the EcoGen anchor the typical system costs about $24,710 before incentives, and each kilowatt makes about 1,090 kilowatt-hours a year on a PVWatts run — so the typical array produces about 9,420 kilowatt-hours. City Light’s rates are low by national standards, which is why EcoGen puts Seattle’s simple payback at about 20.0 years, the second-slowest of the big utilities. The price runs no dearer than the state anchor for reasons that are visible from the street — a deep installer market, short drives, and a city permitting process that handles solar routinely. In exchange, Seattle-based installers tend to carry the City Light interconnection fluency that prevents expensive delay, and Seattle is where the net-metering clock matters most: customers who apply before May 1, 2027 keep net metering for the life of the system under the city’s reported terms, while later applicants get it for 20 years. A Seattle quote at $2.86 a watt is a fair price on a typical system. It is not a fast payback — but it is the system with the longest grandfathering on offer.
Spokane is the cheapest sun in the state and the most expensive lesson in reading averages. At the same $2.86 a watt the typical system costs the same $24,710, but the array makes roughly a fifth more power: Spokane averages about 4.48 peak sun hours a day against Seattle’s 3.57, and about 2,575 sunshine hours a year against Seattle’s 2,170. On the insolation-based estimate used in this guide, a Spokane kilowatt makes about 1,300 kilowatt-hours a year, so the typical array produces about 11,230 kilowatt-hours — more than the average Washington home uses. Avista’s rates are low, which is why EcoGen puts Spokane’s simple payback at about 19.3 years despite the extra sun: the power the panels replace is cheap. A Spokane quote at $2.86 a watt is a good price on a system that makes more power than a Seattle system of the same size. It is not a cheap system, and a Spokane home that heats with gas and uses the state average of 928 kilowatt-hours a month has no business buying more than about 9 kW of panels — the surplus past that line banks credit that the March 31 reset may take for free.
Tacoma is the city where the payback stretches longest, and the reason is the bill, not the roof. Tacoma Power’s residential rates are among the lowest in the country, and EcoGen puts Tacoma’s simple payback at about 30.5 years — the slowest of the seven large utilities. The sun is west-side sun, about 1,090 kilowatt-hours per kilowatt like Seattle, so the typical array makes about 9,420 kilowatt-hours a year. At the EcoGen anchor the system costs the same $24,710 as everywhere else. A Tacoma quote at $2.86 a watt is a fair price on a system that will take three decades to pay for itself on bill savings alone. That is not a reason to refuse it outright — a Tacoma homeowner who values backup power, a home that will run a heat pump and an EV, or a roof that will outlast the panels may still buy — but it is a reason to read the payback section before the quote, and to treat any installer who promises a ten-year payback in Tacoma as someone who has not read the utility’s own rate sheet.
Bellevue is the fastest payback in the state, and the reason is also the bill. Bellevue sits in Puget Sound Energy territory, where the average residential price runs about 19.68 cents before the $7.49 monthly basic charge, against a statewide average of 14.2 cents. At the EcoGen anchor the typical system costs the same $24,710, makes about 9,420 kilowatt-hours a year on west-side sun, and is worth about $1,779 a year at PSE’s effective 18.79-cent rate — a simple payback of about 13.9 years. Bellevue is also the city where the net-metering clock is loudest: PSE has already passed the 4% capacity trigger, so the full-retail credits a Bellevue system earns today survive by the company’s choice, not by legal duty. A Bellevue quote at $2.86 a watt is a fair price on the fastest-paying system in the state. It is also the system with the most to lose if the terms change — which is why the net-metering section below, not the price table, is the section a Bellevue buyer should read twice.
One last city point: installer depth is a Seattle thing. The metro has many installers bidding for the same jobs, which is what pulls quotes toward $2.47 there on the marketplace. Past that line, quotes drift toward the top of the band — longer drives and thinner competition, for distance alone. Get three quotes wherever you live, with at least one from a company already working in your utility’s territory.
Washington Sunshine: Cloudy Winters, a Short December Day & Two Different States
Washington sunshine comes with a shape that rewards the buyer who plans for winter rather than the one who falls for summer. Trust a production estimate only if it tells both halves of the story. The seasonal shape decides whether the system pays, not the yearly total.
The sun, by the numbers. On the EcoGen-implied figure, one kilowatt of panels in Washington yields roughly 1,096 kilowatt-hours a year, at about 3.57 peak sun hours a day in Seattle. That sits far under the national figure and roughly 40% under Nevada, yet it is not nothing — it is about the same as a kilowatt makes in upstate New York, and it is enough to cover 85% of the average home’s use with a typical system. The winter figure matters more than the yearly total, and Seattle’s climate data states it plainly: about 4.83 kilowatt-hours per square meter per day of solar energy in the brightest month, about 1.60 in the darkest — a three-fold swing from the brightest month to the darkest — and December the darkest month of the year, with only about 54 hours of sunshine in the whole month, about 1.8 hours a day, and only about 20% of possible sunshine. On the shortest day, December 21, daylight lasts 8 hours and 30 minutes, against 15 hours and 54 minutes on June 21. Use 1,096 kilowatt-hours per kilowatt as the figure for the year, and design around the seasonal shape instead.
The Cascades are the story. Washington is two solar states divided by a mountain range. West of the Cascades — Seattle, Tacoma, Bellevue, Olympia — the marine climate brings cloud from October to April and long, dry, bright summers. East of the Cascades — Spokane, Yakima, the Tri-Cities — the climate turns continental and arid, with far more sun and far colder winters. The numbers make the split plain: Seattle averages about 3.57 peak sun hours a day and about 2,170 sunshine hours a year; Spokane averages about 4.48 peak sun hours a day and about 2,575 sunshine hours a year. Richland, in the Tri-Cities, averages 4.44; Pullman, on the Palouse, 4.73. Eastern Washington gets roughly a quarter more sun than the Puget Sound lowlands, and a statewide average flatters a Seattle roof and short-changes a Spokane one — and an installer who quotes one statewide number is quoting a guess. The east-west split is real and measurable: about 1,090 kilowatt-hours per kilowatt a year in Seattle on a PVWatts run, rising to about 1,300 in Spokane on the insolation-based estimate used in this guide.
Cold helps more than it hurts. For every degree Celsius above 25, cell efficiency falls by roughly 0.3-0.5% — so a January rooftop in Seattle runs cooler, and therefore more efficiently, than a July roof in Phoenix. A July Seattle rooftop rarely bakes the way a Phoenix roof does, so an hour of Washington sun is worth more than the same hour on a hot southern roof. Cold, clear winter air is good solar weather — it explains much of why a kilowatt of Washington panels produces as much as it does under so much cloud. The catch: panels only work while the sun is up, and in December that is about eight and a half hours, much of it behind cloud. On a fully overcast day, expect roughly 10-25% of rated output: the panels still work, just slowly.
Rain is a free cleaning crew, and moss is the price of it. Seattle averages about 38 inches of rain a year, most of it falling between October and April, and that rain washes dust and pollen off the panels for free — Washington arrays need less manual cleaning than desert ones. The same damp climate grows moss on shaded north-facing roofs, and moss under a panel edge can lift flashing and trap moisture against the roof deck. A Washington quote should show the roof’s condition as its own line, and a roof with moss already growing on it needs cleaning and treatment before panels go on, not after. Snow is a smaller factor west of the Cascades — Seattle averages only about 6 inches a year — but east of them Spokane averages about 45 inches, and a Spokane array holds snow longer than a Seattle one. No Washington snow-loss percentage was verified, so none is printed here — and any installer handing you a production estimate should be asked what snow loss it assumes and what tilt it is built on.
The roof, and the rain it carries. A rooftop array in Washington carries a rain load on the flashing and the roof together, heaviest where the winter storms come off the Pacific. No Washington design snow-load number was verified, so none appears here — ask the local building department for the roof’s snow-load rating and let that number govern, not the installer’s guess. Replace any roof with under ten years left before the panels go on: a later reroof means removing the panels and reinstalling them, $2,000 to $4,500 above the roofing job, and many Washington insurers refuse to cover an array on a roof over 15 to 20 years old. A roof near the end of its life means pricing the reroof before anything is signed. Putting new panels on a roof you will soon replace is the costly error this guide is written to prevent. In Washington, standing-seam metal is hard to beat for solar: clamps grip its seams without a single penetration, and rain leaves metal sooner than it leaves asphalt. Ask for panels rated to UL 61730 / IEC 61730, and get your homeowners policy’s storm-damage cover for the array confirmed in writing.
Putting it together. The gear is ordinary; the settings are Washington ones. Face the array south where the roof allows, tilting it steep enough to shed snow east of the Cascades and catch the low winter sun. Fit microinverters or optimizers so one shaded or snow-covered string cannot drag the whole array down, and insist on a PVWatts estimate that prints its monthly shape on the page — June next to December, Seattle next to Spokane — because the yearly total hides the winter the system has to survive.
Net Metering in Washington: Full-Retail Credits With Two Clocks Running
Washington is one of the states that people get wrong in both directions, and the correction matters more here than almost anywhere else, because the rule has two clocks running at once — a capacity clock and a calendar clock — and either one can end the deal. Some people claim Washington has no net metering at all. That is wrong. Others claim Washington’s net metering is guaranteed forever. For anyone installing today, that is wrong too. What Washington has is full one-to-one retail credit for every exported kilowatt-hour, required by law only until the earlier of a capacity trigger or June 30, 2029 — and a yearly reset every March 31 that takes whatever credit is left.
The rule. The net-metering statute, RCW chapter 80.60, binds every utility in the state. For a home system up to 100 kW AC, every kilowatt-hour sent to the grid is credited at the full retail rate — one kilowatt-hour out earns one kilowatt-hour back — and those credits carry forward from bill to bill. That is the generous half of the rule, and it is why Washington solar works at all with so little sun: the surplus is not sold at a wholesale fraction, it is banked at full value. The sting is in the second half. Under RCW 80.60.030(5), on March 31 of each year, any remaining unused credits for kilowatt-hours accumulated during the previous year are granted to the electric utility, without any compensation to the customer-generator. The credits are kilowatt-hours, not cash, and they do not carry forward indefinitely. A system that banks a big summer surplus and has not spent it by the end of the darkest stretch of the year gives it away.
The two clocks. The law’s duty to offer net metering runs only until the earlier of two limits. The first is the capacity trigger: full retail credits are required only until net-metered systems in a utility’s area reach 4% of that utility’s 1996 peak demand. The second is the calendar backstop: June 30, 2029, the latest date the obligation can run. About three years out, and it applies statewide. Past either limit, a utility may set its own rate for new customers — and the customers who started net metering before the limit keep their terms only as long as their existing interconnection agreement remains valid. That is the framework. What follows is where each utility stands against it, because the answer is different in every territory.
Puget Sound Energy has already passed the trigger. PSE, the largest utility in the state at about a third of homes, has exceeded its 4% threshold — 132.25% of the trigger on the Washington State University Energy Program table of January 31, 2026 — and still enrolls new customers under Schedule 150, voluntarily. That is a company commitment, not a legal guarantee: PSE says it will give notice before closing, and Schedule 150 stays open until a new solar rate takes effect, but no successor schedule had been filed with the state regulator as of EcoGen’s October 2026 check. This is a real act-now case, not a marketing deadline. At PSE, the legal duty to credit you at full retail is already met. Waiting is a bet that a company keeps offering something it no longer has to.
Seattle City Light has the longest runway. City Light’s reported terms give customers who apply before May 1, 2027 net metering for the life of the system; those who apply later get it for 20 years. That is the most generous grandfathering in the state, and it is the reason a Seattle buyer has less urgency than a Bellevue buyer — though the May 2027 date is a reported term rather than a statute, so confirm it with City Light in writing before relying on it. Snohomish County PUD and Avista work under the same law at different points against the same 4% trigger; check each one’s position directly, because the WSU table moves as new systems connect.
Pacific Power is already moving. Pacific Power has proposed replacing net metering with net billing, which would credit exports at an export credit rate of 5.167 cents a kilowatt-hour instead of the full retail rate, with hourly netting, effective February 2027. Under its proposal, a complete application by February 1, 2027 keeps net metering for 25 years. The status of that proposal is genuinely unresolved in the sources this guide checked: one tracker records the successor as approved, while EcoGen reported on October 14, 2026 that the request was still pending before the Utilities and Transportation Commission (Docket UE-250695). This guide does not resolve the conflict — it flags it. A Pacific Power customer should ask the utility in writing, before signing anything, which tariff a system applied for today will actually land on, because the difference between full retail and 5.167 cents is the difference between a 18-year payback and a much longer one.
The PSE alternative that pays less. PSE also offers an optional tariff, Schedule 667, the Solar Energy Credit, which pays 6.713 cents for each kilowatt-hour sent out. It replaces net metering: a customer cannot have both. At 6.713 cents against PSE’s roughly 19.68-cent average price, Schedule 667 is worth about a third of what net metering pays for the same export, so no household that can still enrol in Schedule 150 should choose it. It exists as an option, not as a replacement PSE has announced — and the payback figures in this guide do not model it.
The size of the credit, in numbers. The credit is worth your utility’s retail price, so it varies by territory more than by anything else. At PSE the effective value is about 18.79 cents a kilowatt-hour once the $7.49 monthly basic charge is taken out. At Seattle City Light, Tacoma Power and the PUDs the value is lower, because their residential rates are lower — which is exactly why their paybacks run longer. The credit moves with the retail rate, which in Washington has been climbing about 4.15% a year, among the fastest in the country.
The co-op and PUD wrinkle. The statute binds investor-owned utilities and public utility districts alike, but the PUDs set their own programme terms within the law — how excess is credited, what the interconnection application looks like, what happens at the balance date. Clark PUD, Cowlitz PUD, Snohomish PUD and Tacoma Power each run their own version. A household on a PUD or co-op meter needs its own utility’s solar terms in writing — no statewide default covers those details, so the paper is the only protection.

The Sales Tax Exemption: Washington’s One Real Saving
Every Washington solar quote has a line the buyer should read twice. It is neither a rebate nor a credit. It is the absence of a tax — and in Washington it is the only state money in the project.
A 100% exemption, through the end of 2029. Washington gives a 100% sales and use tax exemption for solar systems that can generate at least 1 kW but no more than 100 kW AC, bought from July 1, 2019 through December 31, 2029. The legal basis is RCW 82.08.962 and RCW 82.12.962, created by E2SSB 5116. The exemption covers qualifying equipment and, where the installer meets the state’s conditions, the installation labour as well. Give the seller an exemption certificate — the Department of Revenue’s form REV 40 2432A — and the tax simply does not appear on the invoice. Systems between 101 and 500 kW get a 50% exemption instead, which no home system will need.
What it is worth. The exemption is worth the combined state and local sales tax rate on the whole job, and Washington’s combined rates run high. Vancouver charges 8.9%, Camas and Washougal 8.8%, and unincorporated Clark County 8.0%, per the Department of Revenue’s rate notice effective April 1, 2026. At the combined rates most Washington homeowners pay — roughly 9-10% — the exemption is worth about $2,200 to $2,500 on the typical $24,710 system. That is NestPriced arithmetic on the published rates, stated as an illustration, and the exact figure depends on the city: a Seattle system at the city’s combined rate saves a little more, a rural system a little less. It is the largest single saving in a Washington project, and it arrives without an application, a queue, or a vendor — only a certificate handed to the seller.
The condition to check. Installation labour is exempt only when the installer meets the state’s list of conditions, and the job must be finished by December 31, 2029. A quote that adds sales tax to a qualifying system is either using an installer who does not meet the conditions or has not filed the certificate — ask which, and get the exemption in writing before you sign. And note the expiry: the statute expires on January 1, 2030. A system finished in 2030 pays the full tax. That is a second clock, quieter than the net-metering one, but it is written into the same law.
What the exemption is not. It is not a rebate, and it is not a credit. No cheque arrives. No state office pays anything. The saving is the tax that was never charged, and it is already reflected in the gross prices in this guide — the $24,710 typical system is priced without sales tax added, because a qualifying Washington system does not pay it. Any quote that shows a sticker price, then subtracts a sales-tax saving as if it were a rebate on top, is double-counting the same money.
Payback: How Long Until Washington Solar Pays for Itself?
Payback is where a Washington system either earns its keep or does not, and the answer turns on a fact no other state in this series shares: there is almost nothing to subtract from the sticker price. No REC payment, no utility rebate, no state credit, no federal credit. The price is the price, less a sales tax that was never charged. The worked examples below use EcoGen’s anchors, show every input, and treat EnergySage only as a cross-check, marking each place the two disagree.
A worked example. Take the typical 8.64 kW system at $2.86 a watt, which works out to $24,710 before any incentives are counted. At about 1,096 per kilowatt, a year’s output lands near 9,469 kilowatt-hours. At Puget Sound Energy, where the effective price is 18.79 cents once the $7.49 monthly basic charge is taken out, that output is worth about $1,779 a year — if every kilowatt-hour is used or banked at full value before March 31. Divide the price by the yearly value and the simple payback is about 13.9 years. That is EcoGen’s own figure, and it is the fastest in the state, because PSE charges the dearest power. The same arithmetic at the other large utilities runs much longer, because the same 9,469 kilowatt-hours is worth less where power is cheaper: about 20.0 years at Seattle City Light, 18.3 years at Pacific Power, 19.3 years at Avista, 26.9 years at Snohomish PUD, 30.0 years at Clark PUD, and 30.5 years at Tacoma Power. Weighted by homes across all seven, the statewide figure is about 18.1 years.
| Case | Simple payback | Source |
|---|---|---|
| EcoGen, Puget Sound Energy ($24,710) | ~13.9 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Pacific Power | ~18.3 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Avista (Spokane) | ~19.3 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Seattle City Light | ~20.0 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Snohomish PUD | ~26.9 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Clark PUD | ~30.0 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, Tacoma Power | ~30.5 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EcoGen, statewide weighted | ~18.1 yrs | EcoGen per-utility figures, Oct 30, 2026 |
| EnergySage statewide (13.25 kW) | 15.3 yrs | EnergySage, Nov 2026 — flagged, modeled |
The statewide figure does not exist. EcoGen publishes a weighted statewide payback of about 18.1 years, and it says why the single number is misleading: the payback depends on the utility’s rate, the March 31 credit reset, and the home’s winter use. One Washington payback with no utility named is a guess rather than a figure. EnergySage’s modelled figure — 15.3 years statewide — is built on its own marketplace averages, an average system of 13.25 kW at $2.47 a watt, and savings that assume the surplus keeps its full retail value for 25 years. None of that is a verified Washington payback, and no quote should cite one for a Tacoma home.
Every assumption behind the payback math is stated here as the numbers are worked out. The arithmetic behind EcoGen’s published totals follows below, laid out step by step and labelled a NestPriced illustration rather than a quote. Begin with what the typical system makes in a year: 9,469 kilowatt-hours. Suppose the house uses it all, either the moment it is made or through banked credits spent before March 31 — at PSE’s effective 18.79 cents, worth about $1,779 a year. Against the $24,710 price, that is about 13.9 years. Now suppose the house wastes a fifth of it at the March reset — a gas-heated home with a big summer surplus and a small winter load — and the yearly value falls to about $1,423, stretching the payback to about 17.4 years. At Tacoma Power, where the same output is worth far less because the rate is lower, the same system takes about 30.5 years even with nothing wasted. Use the per-utility figures as the headline. Use the waste case to see what the March reset is doing: it is doing the work of a second, hidden discount on every oversized system.
What moves the payback most. Winter load is the biggest lever. In Washington it matters more than in any full-retail state without a reset, because a kilowatt-hour banked in July and unspent on March 31 is worth nothing. Electric heat, a heat pump, or an EV charged at home in winter burns through the summer surplus before the reset — and that is why the homes that pay back fastest in Washington are the ones that use the most power in the darkest months. Rate escalation is the second lever, and in Washington it is a live one: residential rates rose 7.2% in the year to August 2026, and EcoGen puts the longer-run climb at 4.15% a year, among the fastest in the country. At today’s prices the payback shortens if rates keep climbing and lengthens if they do not, and no honest quote can promise which way it goes. The net-metering terms are the third lever, and in Washington they are a live one too: a PSE customer who enrols under Schedule 150 today keeps full-retail credits until a successor rate arrives, while a Pacific Power customer may be looking at 5.167 cents for exports from February 2027. Financing is the fourth lever. Dealer fees on a solar loan can lift the effective price by 15-30%. Judge quotes on cash price per watt, and set the monthly payment aside until then. And the timing lever is the one buyers forget: the sales-tax exemption ends December 31, 2029, and the net-metering obligation ends June 30, 2029 at the latest — so a system bought in 2030 pays tax on the hardware and may bank its surplus at a successor rate instead of retail.
Who still comes out ahead. The numbers work for four kinds of Washington household. The Puget Sound Energy customer, where the power is dearest in the state and the payback is about 13.9 years. A home that heats with electricity or a heat pump, whose winter load spends the summer surplus before March 31. Another is the household adding panels alongside a heat pump or an EV, sizing to the new winter load without building past its own annual use. Then there is the household buying mainly for the rate rises. Washington power is up 7.2% in a year, so five more years of the same turns a slow-looking system at today’s rates into a faster one. Walk away when the home heats with gas, sits empty all winter, and banks a surplus it cannot spend. Walk away when you are on Tacoma Power or Clark PUD and the quote promises a payback under fifteen years. And walk away when the installer projects savings without naming your utility’s rate, its position against the 4% trigger, and what happens to your credits on March 31.

Batteries in Washington: Backup Value, Not Bill Savings
No add-on turns up in Washington solar quotes as often as a battery, and none gets oversold as often. Here it earns its keep for exactly one reason — and any quote that sells it on another reason is selling a feeling rather than a return.
What a battery costs. The combined job comes to about $39,938: the typical 8.64 kW system at $24,710, plus a 13.5 kWh storage unit at about $15,228 installed at the current national rate of about $1,128 per kWh. No Washington-specific battery price per kilowatt-hour was verified for this guide, so the figure used is the national one, flagged as national. Washington has no battery rebate of the kind some states offer — what it has instead is a utility programme that pays for the battery’s grid services, and it pays far less than a rebate. A battery bought with a 2026 owner install gets no federal credit either: §25D covered storage too, and it ended on the same day.
The Flex programme pays for grid services, not for the battery. Puget Sound Energy’s Flex Batteries programme pays homeowners who enrol an eligible battery: $75 per kWh of storage on enrolment, up to $1,000 per battery, plus up to $500 per battery a year during Flex events, when PSE draws power from enrolled batteries at times of peak demand. Households in documented outage-prone areas or on low incomes can qualify for enhanced incentives of up to $10,000. PSE never discharges a battery below 20% of its capacity, events run up to 50 times a season and 100 times a year, and a household can keep net metering while enrolled. One installer source puts the annual event payment at up to $300 a year rather than $500; this guide uses $500, from the source that checked pse.com in October 2026, and flags the $300 figure as a conflict. A statewide battery incentive bill, SB 6008, introduced in the 2026 session, would create a Residential Battery Incentive Grant Program that could start January 1, 2027 if it passes — it has not passed, and this guide counts nothing from it.
What a battery earns on the bill. On the grid, a battery earns the spread between the export rate and the retail rate, banking a kilowatt-hour that would have earned the export rate and releasing it after dark in place of a kilowatt-hour bought at retail. In Washington that spread is, for now, roughly zero — because under full one-to-one net metering the export already banks at the full retail rate. A kilowatt-hour stored in the battery and used at night saves exactly what a kilowatt-hour exported and credited would have saved. That is the honest arithmetic, and it is the reason a Washington battery earns nothing on the bill while net metering lasts. What the battery does earn is the Flex programme: about $1,000 upfront and up to $500 a year in event payments, which on a $15,228 battery is about 28 years of payments before the battery pays for itself — longer than the battery will last. The spread only opens up if net metering ends: on PSE’s optional Schedule 667, where exports earn 6.713 cents against a roughly 19.68-cent retail price, a stored kilowatt-hour would be worth about 13 cents more than an exported one — but no household that can still enrol in Schedule 150 should be on Schedule 667 in the first place.
What a battery is actually for. Think of a battery as backup and resilience rather than an investment — buy it for the outage, not for the return. Washington’s grid is generally reliable, but the December 2025 windstorm took power from more than 140,000 PSE customers, and winter storms, wildfire-season shutoffs east of the Cascades, and the occasional ice storm do take power out. Size the battery to the loads that matter when the power is out — heat, refrigeration, water, medical equipment — and it keeps a house livable through an outage. Size it to the loads that matter in an outage rather than the whole house. Treat the money as insurance rather than an investment. Our solar battery cost guide carries the full battery arithmetic — what a battery earns on the bill, what the Flex programme covers, and what it costs net.
Washington Incentives in 2026: What Exists and What Does Not
The federal credit is gone, yet Washington still offers two things worth having — a sales-tax exemption and full-retail net metering — and nothing else. Read the list below carefully — most solar advertising in the state skips the conditions, and the two real benefits are easy to confuse with something they are not.
No rebate from Olympia, and no income-tax credit either. Washington pays no rebate for rooftop panels from the state itself — no cheque from Olympia, and none from any utility for the panels. The state’s money arrives through the sales-tax exemption, which is a tax not charged rather than a payment, and through the net-metering credit, which is a bill credit rather than cash. The only other money in a Washington solar project sits on the electric bill: power used at home earns full retail, and surplus power banks at full retail until March 31.
The sales-tax exemption is the big one, and it is priced in public. The 100% exemption on systems of 1 to 100 kW AC runs through December 31, 2029, under RCW 82.08.962 — about $2,200 to $2,500 on a typical system at the combined rates most homeowners pay. The full mechanics are in the exemption section above; the point here is that it is the only state-level money in the project, and it arrives through a certificate handed to the seller, not from the state directly.
The production incentive is closed, and it has been closed for years. The Renewable Energy System Incentive Program, known as RESIP, paid homeowners per kilowatt-hour generated, administered through Washington State University. It closed to new applicants on June 30, 2021 under RCW 82.16.165, after its funds were fully subscribed, and no new funding has been appropriated since. If a neighbour is still receiving production payments, that is why — they got in before mid-2021, and no new household can join. Any quote that promises a yearly state payment for the power the system makes is pricing a programme that ended five years ago.
There is no state income-tax credit, because there is no state income tax. Washington has no individual income tax, so there is no state return against which a credit could be claimed. The point sounds obvious, and it is the reason a surprising number of quotes get it wrong: a line for a state tax credit on a Washington quote is pricing a law that cannot exist.
For renters and condo owners, community solar is the way in. No roof of your own? With community solar you join a shared solar farm, take a share of it, and watch a credit land on your bill. Washington’s utilities and community organisations run community solar programmes, and for a renter in Seattle or a condo owner whose roof is common area, it is the only route that exists. The terms vary by programme, so get them in writing.
No federal home energy rebate is currently open to Washington households. The state was awarded federal HEAR and HOMES money, but Washington’s federal programmes — called HARP and HOMES here — have not launched. The Department of Commerce says it and its administrator are setting up delivery and reviewing the Department of Energy’s June 2026 notices, and no start date has been announced. No household can apply, and work done before launch will not get the rebate — do not spend money based on a hoped-for rebate. A separate state-funded HEAR programme is open through local administrators, for households at or below 150% of area median income, with about $39.3 million awarded to 40 administrators and amounts set locally. Even once the federal programmes finally open, a solar purchase still gets nothing from HEAR: what it buys is electrification and nothing else — heat pumps, heat-pump water heaters, electrical panels, and wiring tied to insulation are the whole list, and the programme’s scope leaves out panels, batteries, EV chargers, and windows.
| Item | Value | Notes |
|---|---|---|
| Sales tax exemption (1–100 kW AC) | ~$2,200–$2,500 on typical system | 100% of state + local tax; through Dec 31, 2029; RCW 82.08.962; certificate REV 40 2432A |
| Net metering credit | Full retail, 1:1 | RCW 80.60; up to 100 kW; ends Jun 30, 2029 or at 4% trigger; Mar 31 reset |
| PSE Flex Batteries | Up to $1,000 + up to $500/yr | $75/kWh enrolment; enhanced up to $10,000; battery only, not panels |
| WA state rebate for panels | $0 — none exists | No state or utility rebate for panels |
| WA state income-tax credit | None — no state income tax | No state credit is structurally possible |
| Production incentive (RESIP) | $0 — closed Jun 30, 2021 | RCW 82.16.165; no new funding since |
| Property-tax rule | None verified | No WA solar property-tax exemption claimed here |
| Community solar | Available | Via utility and community programmes; terms vary |
| Federal HEAR / HOMES (HARP) | Not launched | Commerce setting up delivery; no start date; do not budget $8,000 |
| State-funded HEAR | Open locally | At or below 150% AMI; ~$39.3M to 40 administrators; amounts set locally; heat pumps etc., never solar |
Federal Help in 2026: No Tax Credit Remains — but Washington’s Lease Route Survives
One paragraph holds the whole federal picture for 2026. That is precisely why so much solar advertising still gets it wrong. In Washington that paragraph grows a second half most states never need, because the lease route that rescues other states works here — and a buyer who never hears about it has one fewer option than they actually have.
Buy the system and have the crew finish it in 2026, and the federal tax credit on the purchase is $0. Any system placed in service after December 31, 2025 falls outside the Residential Clean Energy Credit (§25D, 30%) — that credit is finished. The One Big Beautiful Bill Act, Public Law 119-21, signed July 4, 2025, set the cutoff, and the IRS fact sheet FS-2025-05 makes the finish date decisive: a deposit paid in 2025 counts for nothing if the crew finished the work in January 2026. §25C, the efficient-home-improvement credit, closed its doors on that very same day. A 2026 quote still showing 30% off is pricing a law that ended on December 31, 2025, so get the installer to take it out and re-price the work. Washington cost pages still print an “after tax credit” column, some of them, and that column still subtracts the dead 30% credit. No figure in this guide touches it.
In Washington, leases and PPAs are legal, and the company that owns the system can still claim the commercial credit. Leasing companies have not lost everything — a system they own can still collect the 30% commercial clean-electricity credit under §48E. Construction must have started by July 4, 2026, and the array must enter service by December 31, 2027; IRS Notice 2025-42 sets both deadlines. A homeowner who may legally host a company-owned array sees the credit through a lease or a power purchase agreement, with the company folding some of the value into a lower monthly payment. Washington is one of the states where that door stands open — leases and third-party PPAs are both legal here, and national installers are still signing new Washington residential contracts in 2026. The escalator is the catch. Lease payments commonly climb 1.9% to 2.9% a year over decades, and the value the provider passes along is whatever the contract says — not the full 30%. There is a second catch that is purely Washington: a leased system earns its net-metering credits the same way an owned one does, but the homeowner never owns the hardware, so the resale value and the long-run savings belong to the company, not the house. Before setting a lease beside a loan, work out what the escalator costs over the full term, and have a lawyer read any lease or PPA before signing: a lease is the contract behind free-solar advertising, and no Washington programme hands out free panels.
HEAR money never touches solar. Once the state’s federal programme opens — which it has not — an income-eligible Washington household could still draw up to $8,000 from the Home Electrification and Appliance Rebates programme in 2026. That money is earmarked for electrification work alone — panels are outside its scope entirely. HEAR pays for electrification gear and nothing else: heat pumps, heat-pump water heaters, electrical panels, and wiring that goes with insulation work are the whole list, and not panels, not batteries, not EV chargers, not windows. Under DOE Programme Notices 26-1 and 26-2 — dated May 29, 2026, announced June 1, 2026 — funding covers only upgrades that swap one electric system for another; fuel-switching is excluded outright. The state’s own federal HARP and HOMES programmes have not opened, and no start date has been announced. A solar price that includes a HEAR rebate describes a programme working in a way it does not. HEAR can still help a Washington homeowner: a heat pump paired with new panels is common, and the heat-pump half may qualify once the state’s programme opens. The solar half never will. One date note: some secondary sources cite June 1, 2026 as the date of the DOE notices; the notices themselves are dated May 29, 2026, and this guide uses that date.
The honest summary is this: a Washington homeowner who buys solar panels outright gets nothing from the federal government in 2026. Where the lease market is thin or murky, that indirect route barely exists; in Washington the legal path is clear and providers are actively selling leases, so the federal contribution can still flow through one. On a cash quote, the price is the price, less a sales tax that was never charged. For the whole 2026 federal picture — every credit, every deadline, every change — see our federal tax credits guide.
Permits & Licensing: What Washington Requires
In one respect Washington’s licensing picture is weaker than most states’: there is no state-level solar installer certification to check, and the check that does exist is a general electrical licence, not a solar one. The check itself is short. Every installer in the state faces the same check.
The electrical work needs a licensed electrical contractor, and the licence is the first document to ask for. Washington’s Department of Labor & Industries licenses electrical contractors, and all electrical work on a solar installation — including wiring and terminations — must be done by the entity authorised to do the electrical work, which the state electrical rule describes as the owner or an appropriate electrical contractor. The rule for photovoltaic systems is WAC 296-46B-690. Ask for the electrical contractor licence number and check it on the L&I registry before you sign; a company that waves a general business licence instead has shown you the wrong paper. NABCEP certification is a plus — a company that carries it has shown you a credential the state does not require but the trade respects.
Real time goes into permits and interconnection, and that timeline sets the schedule’s limit. Three permissions stand between the quote and the switch-on, and they come in this order: building permit, electrical permit, utility interconnection agreement. Of the three, the permits are usually the fast part in the suburbs. In Seattle they are the slow part, where the city runs the process and older housing stock adds review steps. Interconnection takes longer: Puget Sound Energy asks for the interconnection application before installation, and systems over 25 kW need an engineering study, while Seattle City Light runs a streamlined interconnection for systems under 25 kW. This guide found no verified Seattle permit timeline, no statewide fee schedule, and no verified utility interconnection timeline, so it gives a figure for none of them. The city or county building department sets the fee — and it also supplies the snow-load figure the roof has to meet. Every new home install includes rapid shutdown to NEC 690.12 as standard — a quote that omits it deserves a question. Permission to operate inside two weeks is not something any installer can promise. The utility sets that timetable, not the installer.
Washington has a solar-access law, and it is a short one. The governing documents of a homeowners’ association may not prohibit the installation of a solar energy panel by an owner or resident on the owner’s own property, as long as the panel meets applicable health and safety standards and the electrical code. The law is RCW 64.38.055, in effect since July 26, 2009 and applying retroactively, so an older set of covenants banning solar does not survive it; associations under the newer common interest communities act follow RCW 64.90.510. The association may still bar panels that stick up above the roofline, require panels on a street-facing slope to follow the roof’s slope with the top edge parallel to the ridge, require frames to be painted to match the roof, require ground-mounted panels to be shielded from view unless that cuts their performance by more than 10%, require the owner to indemnify the association, and set other reasonable rules on placement. The protection does not cover common areas, so get architectural-review approval in writing before you order the panels. Condo owners face a double hurdle: the roof is usually common area, so the board’s approval decides everything. If an installer tells you Washington has no solar-access law, ask them to read RCW 64.38.055 — the law has been on the books since 2009, and it is on the homeowner’s side unless the roof is common area.
The cautionary case is a national one with a Washington moral. Washington sees the same door-to-door solar complaints as every other state: tax-credit eligibility misstated, aggressive pitches, and installs that do not match the contract. A door-to-door pitch deserves caution — check the Attorney General’s complaint record before you sign, and remember that the biggest advertising budget in the state is no promise the company will still be there in five years.
What Pushes Your Washington Quote Up or Down
The $2.86 anchor is a starting point, not a promise. No single quote has to land there. Seven forces can move a Washington quote by thousands of dollars. Three of them are geography and climate, not equipment.
Seattle labour, permits, and ageing roofs set the Washington spread. EcoGen puts the spread in plain numbers: quotes run from $17,160 to $34,320, and the gap is the roof, the permit queue, and the crew’s drive time. City permitting plus older housing stock adds process cost and roof work, and Washington’s housing is old enough that a structural surprise belongs in the budget as a line item, not a footnote. The state has no shortage of steep, multi-plane roofs, which add labour hours while fitting fewer panels on the best-facing slope. A Seattle quote ought to break out permitting and roof work as separate lines; a quote that buries them has hidden them somewhere else. Get the panel layout, the racking attachment method, and the plan for a roof that needs work first — in writing, before you sign.
First, the roof itself: can it carry a winter’s worth of rain? Through a Washington winter, freeze-thaw cycles grind away at flashing and shingles east of the Cascades, and months of rain test every penetration west of them — something roofs down south simply never experience. Replace the roof first if it has under a decade of life left — before the array goes on. Removing the panels and reinstalling them for a later reroof costs $2,000 to $4,500 before the roofing work even starts. Before you budget, find what a reroof adds to the bill — our roof replacement guide has the numbers. Standing-seam metal, common on Washington homes, takes solar as well as any roof, because the clamps grip the seams without penetrating them and rain runs off metal sooner than asphalt does. Ask the building department for the roof’s snow-load rating well ahead of installation day. After is too late.
Panel tier. Expect to pay roughly 10-20% more per watt for top-tier panels than for value-tier ones. What the premium buys in Washington is twofold: better low-light performance on cloudy winter days, and degradation that runs slower across a quarter century of cold, bright sun. A tight roof is where paying extra for efficiency pays off; a large array on a wide-open roof around eastern Washington is where cheaper value-tier panels usually win. Premium n-type panels hold their output longer as well. They lose 0.25-0.5% a year and keep 91-93% of rated output at year 25; the fleet median loses near 0.5% a year and keeps about 88% at year 25, per NREL.
Inverter choice. A string inverter costs less up front. Where roofs carry partial shade, microinverters or optimizers earn their higher price by generating more. Washington roofs carry shade more often than installers admit, with their evergreens, dormers, and chimneys — and snow lingering on one part of an array shades it just like a tree does. A microinverter watches only its own panel. A single shaded or snow-covered panel cannot pull the rest of the string down. A string inverter usually lasts 10-15 years, so budget for one replacement over the system’s life; microinverter warranties usually run near 25 years. Every inverter type is priced across its whole lifespan in our inverter replacement guide, where every dollar figure is national rather than Washington-specific.
The electrical panel. Plenty of Washington homes still run on 100-amp service, older homes in Seattle, Tacoma, and the inner-ring suburbs especially, and a solar install often forces the question. A 200-amp panel upgrade runs $1,500-$4,000 nationally. Per our electrical panel upgrade guide, it is the add-on that most often surprises a Washington buyer — the one cost nobody budgets for. The quote should say whether the panel upgrade is in the price. Settle that before you sign, not while the electrician is standing in the driveway. No Washington panel-upgrade dollar figure was verified, so the gap is filled by a national figure, clearly marked as such. One Washington wrinkle: a panel upgrade is electrification work, the kind HEAR exists to pay for, and Washington’s federal HEAR programme has not opened yet.
Financing terms. On lifetime cost, paying cash wins; every other way of paying costs more over the years. On a $0-down loan, dealer fees worth 15-30% of the cash price — sometimes more than 50% — are quietly absorbed into the amount financed, a figure from the Consumer Financial Protection Bureau’s August 2024 market spotlight. That is a national number, and Washington quotes carry it in full like anywhere else. In Washington the dealer fees can quietly exceed everything the sales-tax exemption wins, because the exemption is worth about $2,200 to $2,500 while the fees on a $24,710 system run $3,700 to $7,400. The fourth path — a lease or PPA — is a real option here, and leases and PPAs are legal in Washington, with the provider claiming the §48E credit and the monthly payment carrying some of that value. But the escalator, commonly 1.9% to 2.9% a year, has to be costed over the full term before the lease is compared on its monthly payment at all. Community solar is the fifth path: Washington’s utilities and community organisations run it, so renters and condo owners have a route that does not need a roof at all.
Upkeep and lifespan. Panels keep making power for 25-30 productive years, with the warranty ending first and output fading a little each year after that. Materials and workmanship are usually warranted for 10-25 years, and the performance warranty usually runs 25-30 years, guaranteeing 80-92% of rated output at year 25 depending on the tier. Upkeep is light work. An occasional cleaning and a yearly production check are the whole job — nothing moves, so nothing wears out. A steep array in Washington usually sheds its snow on its own, while a low-slope roof holds snow longer, and the winter rain does most of the cleaning a desert array needs by hand. Every one of those lifespan, degradation, and maintenance figures comes from national data; no Washington version of any of them exists, so each one carries a national flag.
Getting Quotes in Washington: The Checklist
Washington is a demanding state to buy solar in — weak sun, cheap power, a net-metering rule with two clocks, and almost nothing to subtract from the price — but it is an honest one for a homeowner who checks the paperwork before the sales pitch. The sticker is very nearly the price. Keep this checklist in hand at every bidder meeting. Nothing gets signed until each item carries a written answer.
The ten-item quote checklist:
- Your utility’s rules, in writing, first — PSE’s Schedule 150 position past the 4% trigger, Seattle City Light’s May 1, 2027 grandfathering date, Pacific Power’s proposed net billing, or your PUD or co-op’s own terms. The export credit and the March 31 reset decide the payback before anything else — and a PSE enrolment today survives by the company’s choice, not by law.
- One identical spec sheet for all three bidders, with the cash price per watt written on it. With the Washington anchor at $2.86 a watt, a quote far above it needs explaining, and a quote far below it needs a hard look at what was left out — the permitting and the roof work on a Seattle house above all.
- The two numbers, in order: sticker, then tax — the gross price at $2.86 a watt, and the sales-tax exemption (100% through December 31, 2029, certificate REV 40 2432A) shown as tax never charged, not as a rebate. Cross out every 30% federal credit line and every state rebate line you see. A 2026 owner purchase receives $0 from Washington — Washington offers no state rebate and no state income-tax credit, and the production incentive closed in 2021. A 30% credit line on a 2026 quote is arithmetic built on a law that no longer exists. Ask for it to be removed.
- The March 31 reset modelled, not assumed — for each month, work out how much of what the panels make the house uses the moment it is made or banks and spends before March 31, and price the rest at zero. Any quote that banks June into April at retail is wrong — and so is one that sizes past the house’s annual use.
- Model monthly self-use rather than assuming it — for each month, work out how much of what the panels make the house uses the moment it is made, and price the rest at your own utility’s retail rate while net metering lasts. Any quote that prices every export at retail without mentioning the reset is wrong.
- All three Washington credentials verified — the installer’s electrical contractor licence (WA Department of Labor & Industries), the certified electrician who will do the work, and the utility interconnection paperwork filed before installation, checked on the registries, with names matched to the contract. NABCEP certification is a plus.
- Battery, racking, snow guards, tree work, a panel upgrade, and roof work are all listed as separate add-ons, each priced on its own and never folded into the per-watt figure. Check that the battery, if any, is priced against the PSE Flex programme ($75/kWh up to $1,000, plus up to $500 a year) rather than against bill savings it cannot earn while net metering lasts.
- A PVWatts estimate that shows its monthly shape — ask for the monthly curve itself, June next to December, built on roughly 1,096 kilowatt-hours per kilowatt each year rather than nameplate watts. Insist on the monthly curve itself, June next to December, and ask whether the estimate uses Seattle’s 1,090 or Spokane’s roughly 1,300 — the two are not the same roof.
- Snow load, racking, and insurance — get the roof’s snow-load rating from the building department, name the racking’s uplift rating and tilt, specify UL 61730 / IEC 61730 panels by name, confirm rapid shutdown under NEC 690.12, and have homeowners insurance confirm the array’s cover in writing before signing.
- HOA approval, in writing, first — Washington’s solar-access law (RCW 64.38.055, since July 26, 2009, retroactive; RCW 64.90.510 for newer communities) prohibits an association from banning code-compliant solar on the owner’s own property, though it may bar panels above the roofline, require street-facing panels to follow the roof slope, and require ground-mount screening that does not cut efficiency by more than 10%. Have architectural-review approval in hand before ordering panels; condo owners also need board approval for the common-area roof, since common areas fall outside the Act.
Buy, lease, or community solar? Over 25 years, buying wins for a homeowner who heats with electricity or a heat pump, sits in PSE territory, or pairs the array with a heat pump or an EV. Buy it, and the system is yours, the resale value is yours, the sales-tax saving is yours, and every kilowatt-hour you use yourself or bank before March 31 keeps its full retail value. A homeowner who wants no upfront cost and no maintenance suits leasing, and in Washington it is genuinely on offer, the provider claiming the §48E credit — so work out what the 1.9% to 2.9% escalator costs over the full term before comparing anything on the monthly payment. Community solar wins for renters, condo owners, and homes whose roofs are shaded or unsuitable — and in Washington that door is open, through utility and community programmes. An off-grid cabin past the end of the road is a different question entirely. This guide does not answer it. A rural Washington home on a PUD or co-op meter needs its own utility’s terms in writing before anything else happens.

Sources & methodology
Cost anchors (per watt, system size, totals):
- EcoGen Solar Cost Index, September 2026 Edition, prices as of Sep 25, 2026 (page updated Oct 19, 2026): $2.86/W; 8.64 kW typical (Berkeley Lab 2025 median, 3,743 systems); $24,710 total; quotes $17,160-$34,320; neighbours OR $2.77, MT $2.73, US $2.89, ID $2.96
- EnergySage Washington page, Nov 2026: $2.47/W; 13.25 kW average; $32,669 (range $27,769-$37,569); payback 15.3 yrs; 25-yr savings $36,174 — modeled, flagged
- SolarEnergyPrices (Aug 2026): $3.05/W, range $2.80-$3.30; 10 kW $30,500
- NumeralQ (Oct 2026, EnergySage data retrieved Oct 26, 2026): 8 kW $22,330-$29,170 in Seattle, Spokane, Tacoma and Bellevue alike — planning estimates, flagged
Rates and home use:
- EIA, 12 months to Aug 2026: WA 14.2 cents/kWh (US 18.0 cents); average use ~928 kWh/mo (~11,130 kWh/yr); average bill ~$132/mo; Aug 2026 alone 14.63 cents, 819 kWh, $119.88 bill, +7.2% YoY
- PSE: average 19.68 cents less $7.49/mo basic charge = 18.79 cents effective (EcoGen); year-one bill value 9,469 kWh x 18.79 cents = ~$1,779/yr
- Rates climbing 4.15%/yr (EcoGen)
Production:
- EcoGen-implied ~1,096 kWh/kW/yr statewide; typical 8.64 kW makes ~9,469 kWh/yr (~85% of average home use)
- PVWatts v8 (run Nov 6, 2026): Seattle ~1,090 kWh/kW/yr
- Insolation averages: Seattle 3.57 sun-hrs/day (high 4.83, low 1.60); Spokane 4.48 (high 5.53, low 1.16); Richland 4.44; Pullman 4.73 — Spokane ~1,300 kWh/kW/yr is a NestPriced estimate from insolation, flagged
- Sunshine hours: Seattle ~2,170/yr (NOAA, Sea-Tac); Spokane ~2,575/yr; Seattle December 54 hrs, July 312 hrs; December ~20% of possible sunshine; daylight Dec 21, 8 hrs 30 min; Jun 21, 15 hrs 54 min
- Overcast-day output 10-25% of rated output — installer rule of thumb, flagged
Net metering:
- RCW 80.60; systems up to 100 kW AC; full retail 1:1 credits until 4% of 1996 peak demand or Jun 30, 2029, whichever comes first
- RCW 80.60.030(5): unused credits granted to the utility on March 31 each year, without compensation
- PSE past 4% trigger (132.25% per WSU Energy Program table Jan 31, 2026); Schedule 150 voluntary, notice promised; no successor filed as of Oct 2026
- Seattle City Light: apply before May 1, 2027 keeps net metering for life of system; later applicants 20 years — reported term, flagged
- Pacific Power: proposed net billing, 5.167 cents/kWh export credit, hourly netting, effective Feb 2027; complete application by Feb 1, 2027 keeps net metering 25 years — CONFLICT: one tracker records it approved; EcoGen Oct 14, 2026 says still pending (UTC Docket UE-250695)
- PSE Schedule 667 optional Solar Energy Credit 6.713 cents/kWh; replaces net metering, cannot have both
Payback arithmetic:
- EcoGen per-utility simple payback (Oct 30, 2026): PSE 13.9 yrs; Pacific Power 18.3; Avista 19.3; Seattle City Light 20.0; Snohomish PUD 26.9; Clark PUD 30.0; Tacoma Power 30.5; statewide weighted 18.1 yrs; no upkeep, rate growth or federal credit counted
- EnergySage modeled statewide payback 15.3 yrs flagged as modeled
- NestPriced illustration (labeled as such): PSE $24,710 / ~$1,779 = ~13.9 yrs; one-fifth wasted at the March reset → ~$1,423/yr → ~17.4 yrs
- Battery illustration: Flex $1,000 upfront + up to $500/yr → ~28 yrs on a $15,228 battery (national $/kWh)
Incentives:
- Sales tax exemption: 100% of state + local sales and use tax, 1-100 kW AC, Jul 1, 2019-Dec 31, 2029 (RCW 82.08.962 / 82.12.962; E2SSB 5116); certificate REV 40 2432A; labour exempt only when installer meets state conditions; 101-500 kW gets 50%
- Sales-tax value illustration (~$2,200-$2,500 on typical system at ~9-10% combined) is NestPriced arithmetic; city rates verified: Vancouver 8.9%, Camas/Washougal 8.8%, unincorporated Clark County 8.0% (DOR notice Apr 1, 2026)
- No state rebate, no state income-tax credit (WA has no individual income tax); no property-tax exemption verified — none claimed
- RESIP production incentive closed to new applicants Jun 30, 2021 (RCW 82.16.165); no new funding since
- PSE Flex Batteries: $75/kWh enrolment up to $1,000/battery + up to $500/battery/yr events; enhanced up to $10,000; never below 20%; up to 50 events/season, 100/yr (checked pse.com Oct 20, 2026); CONFLICT: one installer source says up to $300/yr — $500 used, $300 flagged
- SB 6008 (2026 session) proposed statewide battery incentive, could start Jan 1, 2027 if passed — not law
- HEAR/HOMES (federal, called HARP in WA): not launched; Commerce setting up delivery, reviewing DOE June 2026 notices; no start date; do not budget $8,000. State-funded HEAR open through local administrators, at or below 150% AMI, ~$39.3M to 40 administrators, amounts set locally
Federal and financing:
- OBBBA P.L. 119-21 and IRS FS-2025-05: §25D and §25C $0 for post-Dec-31-2025 installs, completion date counts
- §48E 30% for third-party-owned systems, in service by Dec 31, 2027, construction begun by Jul 4, 2026 per IRS Notice 2025-42; leases and PPAs legal in Washington; escalators commonly 1.9-2.9%/yr
- DOE Program Notices 26-1 and 26-2, dated May 29, 2026, announced Jun 1, 2026: HEAR electric-to-electric upgrades only, no fuel-switching; solar, batteries, EV chargers, windows outside HEAR. DATE NOTE: some secondary sources cite Jun 1, 2026 as the notice date; the notices are dated May 29, 2026
- CFPB Solar Financing Market Issue Spotlight, Aug 2024: dealer fees 10-30%, sometimes over 50%; EcoGen: 15-30% on $0-down loans
- Battery cost: 13.5 kWh add-on ~$15,228 at national ~$1,128/kWh
HOA and licensing:
- RCW 64.38.055, in effect Jul 26, 2009, retroactive: governing documents may not prohibit code-compliant solar on the owner’s own property; conflicting provisions void. RCW 64.90.510 for newer common-interest communities. Associations may bar panels above the roofline, require street-facing slope conformance, paint matching, ground-mount screening not cutting efficiency by more than 10%, and indemnification. Does not cover common areas
- Electrical contractor licence via WA Dept. of Labor & Industries; WAC 296-46B-690 (PV systems); PSE interconnection application before installation, engineering study over 25 kW; Seattle City Light streamlined interconnection under 25 kW; NEC 690.12 rapid shutdown standard (national practice)
- No verified Seattle permit timeline, permit-fee schedule, or utility interconnection timeline — none stated
Labor and lifespan (national figures):
- BLS OEWS May 2025: electricians national median $30.38/hr (no Washington-specific figure pulled)
- Lifespan 25-30 years productive service; NREL median degradation ~0.5%/yr, ~88% of rated output at year 25; premium n-type 0.25-0.5%/yr, 91-93% at year 25 (NREL Jordan et al. 2022)
- Product warranty typically 10-25 years; performance warranty typically 25-30 years, guaranteeing 80-92% of rated output at year 25 depending on tier; string inverter 10-15 years, one replacement expected; microinverters ~25 years
EXCLUDED:
- Any “after 30% credit” prices
- Any HEAR-for-solar claim: HEAR does not cover solar, batteries, EV chargers, or windows; electric-to-electric only since DOE Notices 26-1/26-2, May 29, 2026
- Any state rebate, state tax credit, or production-incentive payment for Washington solar: none exists / closed Jun 30, 2021
- EnergySage’s 15.3-year statewide payback as verified: modeled, EcoGen publishes per-utility figures of 13.9-30.5 years
- The $300/yr PSE Flex annual payment claim: single installer source, conflicts with the pse.com-checked $500/yr figure
- Pacific Power net-billing approval as settled: conflicting sources, flagged in the draft
- The claim that Washington has no net metering: WRONG — full retail 1:1 net metering under RCW 80.60, with a Mar 31 reset and a Jun 30, 2029 backstop
- The claim that PSE net metering is guaranteed: WRONG — PSE has passed the 4% trigger and offers Schedule 150 voluntarily
- washingtoncontractors.org’s “annual true-up in April (surplus paid at avoided cost)”: contradicts RCW 80.60.030(5) March 31 forfeiture; not used
- Washington-specific design snow load, monthly PVWatts table, snow-loss percentage, BLS electrician wage, panel-upgrade price, permit-fee schedule, Seattle permit timeline, utility interconnection timelines, WA property-tax exemption, WA battery $/kWh: not verified, national figures used and flagged as national
*Disclaimer: The prices here are 2026 Washington planning figures. Where you live, which utility supplies your power, your roof’s condition, and which installer you hire all move the final price. Collect three written quotes from Washington installers before fixing a budget. Treat every tax point here as background reading. It is not advice tailored to your own filing. Before filing, have a tax professional licensed in Washington look over your return. Programme rules change — the sales-tax exemption ends December 31, 2029, the net-metering obligation ends June 30, 2029 at the latest, and unused credits reset every March 31 — so confirm current terms with your own utility before signing.*
What do solar panels cost in Washington in 2026?
In Washington in 2026, solar panels install at $2.86 a watt — about $24,710 for the typical 8.64 kW system (EcoGen, September 2026) — with 2026 quotes spanning $17,160-$34,320 by system size. At the EcoGen anchor of $2.86 a watt, a typical 8 kW home system runs about $22,880, while EnergySage puts the state average at $2.47 a watt on a larger 13.25 kW system. A homeowner-owned system installed in 2026 earns a $0 federal credit, Washington offers no state rebate and no state income-tax credit, and the old production incentive closed in 2021 — but the 100% sales tax exemption, worth roughly $2,200-$2,500 on the typical system, means no tax is added to the quote.
Is solar worth it in Washington with so little sun?
Closer than the cloudy reputation suggests. Which utility serves the house decides the answer. Each kilowatt of panels makes about 1,096 kilowatt-hours a year here — among the lowest yields in the country — while the power it replaces runs about 14.2 cents a kilowatt-hour on the 12-month average, and Puget Sound Energy customers pay about 18.79 cents effective. The full-retail net metering does the heavy lifting: on EcoGen’s per-utility figures, payback runs about 13.9 years at Puget Sound Energy and about 20.0 years at Seattle City Light, against about 30.5 years at Tacoma Power. Bellevue, on PSE’s dearest power, is the fastest of the big cities; Tacoma, on the cheapest power, is the slowest.
How does net metering work in Washington?
It credits every exported kilowatt-hour at full retail value, one for one, under RCW 80.60, for systems up to 100 kW — but it has two clocks running. The duty to offer it ends on the earlier of the utility reaching 4% of its 1996 peak demand in net-metered capacity, or June 30, 2029. Puget Sound Energy has already passed its 4% trigger and keeps offering full credits under Schedule 150 voluntarily, with notice promised before closing. And every year on March 31, any credits still unused are handed to the utility for free, so a system has to spend its summer surplus over the winter or lose it.
What is Washington’s sales tax exemption for solar, and what is it worth?
Washington charges no sales tax at all on qualifying home solar systems: a 100% exemption from state and local sales and use tax on systems of 1 to 100 kW AC, running from July 1, 2019 through December 31, 2029, under RCW 82.08.962. Give the seller an exemption certificate and the tax never appears on the invoice. At the combined rates most Washington homeowners pay — roughly 9-10% — that works out to about $2,200 to $2,500 on the typical $24,710 system. It is the only state money in a Washington project: there is no state rebate, no state income-tax credit, and the old production incentive closed to new applicants on June 30, 2021.
Is the 30% federal solar tax credit still available to Washington homeowners in 2026?
Not for a system you own. The Residential Clean Energy Credit (§25D, 30%) has ended, so homeowner-owned systems placed in service after December 31, 2025 get none of it. The cutoff comes from the One Big Beautiful Bill Act, Public Law 119-21, and the IRS has made clear that the installation’s finish date — not the deposit date — is what decides it. Washington does offer a second door that some states do not. Leases and power purchase agreements are legal in Washington. The company owning the system can still claim the commercial credit (§48E, 30%) for systems in service by December 31, 2027, passing some of the value along as a lower monthly payment. The escalator — commonly 1.9% to 2.9% a year — has to be priced over the full term.
Do I need a special license to install solar in Washington?
Your installer does — an electrical contractor licence, in fact. All electrical work on a solar installation must be done by a licensed electrical contractor under the Washington Department of Labor & Industries, with the photovoltaic rules set out in WAC 296-46B-690. Washington has no state-level solar installer certification to check, so the electrical contractor licence is the credential that matters, plus the local building and electrical permits and the utility’s interconnection agreement — Puget Sound Energy asks for the interconnection application before installation. Get the licence number and check it against the L&I registry before signing.
Can my HOA stop me from installing solar panels in Washington?
Usually not. Washington has had a solar-access law since 2009. Under RCW 64.38.055, an association’s governing documents may not prohibit a code-compliant solar panel on the owner’s own property, and conflicting provisions are void and unenforceable — the law applies retroactively to older covenants. The association may still bar panels above the roofline, require street-facing panels to follow the roof slope, require paint matching, and require ground-mount screening that does not cut efficiency by more than 10%. The protection does not cover common areas, which takes many condominium roofs out of it — so get architectural-review approval in writing before you order panels.
Why is solar payback about 14 years in Washington at PSE, but 30 years at Tacoma Power?
Two forces pull against each other, and the utility bill usually wins. The price is below the national average at $2.86 a watt, and the sun is among the weakest in the country at about 1,096 kilowatt-hours a year per installed kilowatt — but every exported kilowatt-hour banks at full retail value while net metering lasts, so the bright summer months earn full price instead of a wholesale fraction. What decides the payback is the rate: PSE charges about 18.79 cents effective, so the typical system’s 9,469 kilowatt-hours are worth about $1,779 a year and pay the $24,710 price back in about 13.9 years. Tacoma Power charges far less, so the same output is worth far less, and the same system takes about 30.5 years. In both cases the March 31 reset can stretch the answer further if the house cannot spend its summer surplus over the winter.
